Descargar Imprimir esta página

Hubix SECRA-1 Manual De Uso página 8

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 16
OPERATING MANUAL
ENGLISH
Electrically Insulating Helmet
with Integrated Face Shield
type SECRA-1
Type:
Variant:
H058S-1 ARC-W1 (ABS)
Class 0 (1 000V), Box Test – class 1
EN 397:2012 + A1:2012, EN 50365:2002, EN 166:2001, GS-ET 29:2010-02
Class E (20kV)
ANSI/ISEA Z89.1:2014
Manufacturer:
HUBIX Sp. z o.o.
96-321 ŻABIA WOLA Huta Żabiowolska ul. Główna 43
Tel: +48 46 857 84 40, fax: +48 46 857 80 21, hubix@hubix.pl, www.hubix.pl
The notified body that carried out the EU-type examination:
Helmet– CIOP-PIB, (No 1437), ul. Czerniakowska 16, 00-701 Warszawa;
Face shield – CIOP-PIB, (No 1437), ul. Czerniakowska 16, 00-701 Warszawa;
The notified body carrying out the conformity assessment procedure to type based
on internal production control plus supervised product checks at random intervals
(Module C2):
- CIOP-PIB, (No 1437), ul. Czerniakowska 16, 00-701 Warszawa.
SECRA-1
1. INTENDENT USE
SECRA-1 type helmets in the H058S-1 ARC-W1 (ABS) variation is intended to
protect the head against injuries caused by falling objects and at the same time,
against electric shock class 0 (1000V) EN 50365:2002 and class E (20kV)
ANSI/ISEA Z89.1:2014 caused by flow of electric current through the head, against
electric arc, and against projected droplets of molten metal. It is recommended in
particular as a personal protection equipment to be used during work on live
equipment, work at heights, and work on electrical connections. Working
temperature in the range -40°C to +60°C.
The face shield has an external scratch-resistant and resistance to damage by fine
particles surface and an internal anti-fog surface. The face shields protect the user
against short-circuit electric arc (class 1- Box Test. They also protect against the
impact of particles with medium energy, the risk of projected solid objects and
liquids, and projected molten metal. The shield also has filter to protect against UV
radiation.
2. MARKING
marking stamped on the helmet shell:
indicates a product intended for work on live equipment;
Klasa 0
Class 0 - electrical class for use up to rated mains voltage of 1,000V AC
and 1,500V DC;
EN 50365:2002 applicable standard "Electrically insulating helmets for use on low voltage
installations";
identification of the manufacturer;
SECRA H058S model name (hard hat);
ABS
material of helmet shell;
53-63cm
range of head circumference adjustment;
7
5
20
/
-24
/
inch
range of head circumference adjustment;
8
8
applicable standard "Industrial safety helmets";
EN 397:2012+A1:2012
-40°C
resistance to very low temperatures (down to -40°C);
LD
resistance to lateral deformation;
MM
resistance to projected droplets of molten metal;
440Vac
electric insulation (according to the EN 397 standard);
ANSI/ISEA Z89.1-2014
applicable standard "American National Standard for Industrial
Head Protection";
Type I
protection against shocks at the top of the head, according to the standard
ANSI/ISEA Z89.1;
Class E
electrical class, according to ANSI/ISEA Z89.1;
LT
lower temperature (according to the ANSI/ISEA Z89.1 standard);
HT
higher temperature (according to the ANSI/ISEA Z89.1 standard);
CE 1437
marking of conformity with the Regulation 2016/425 and the number of the
Notified Body carrying out supervised product checks at random intervals
(module C2);;
LOT NO: XXX
serial number;
www.secra.pl
website address where a declaration of conformity is available.
marking stamped on the rear, outer part of shell:
PROD X/XX
production date (quarter/year);
UTIL X/XX
expiry date (quarter/year).

Publicidad

loading