D2 User Manual
Specifica�ons:
Light Source (SMD):
Lumens:
Colour temperature:
Colour Rendering Index:
Housing:
Lens:
Protec�on Class:
Ba�ery type 1 x 18650:
Voltage:
Charging �me / Ac�ve light �me (hours):
Opera�ng temperature:
Lamp measurements:
Lamp weight:
General Safety Instruc�ons:
1. Do not shine in eyes.
2. Use on flat, stable surfaces.
3. Do not immerse in water or other liquids.
4. Do not operate with wet hands.
5. Do not cover.
6. Do not disassemble.
7. Do not operate if the housing, wiring or lens is open, missing or damaged.
8. Do not a�empt to repair if damaged. Repairs must only be carried out by the manufacturer or authorized
service representa�ve.
Guidance for use:
Press the on/off switch on the back. Choose desired switch stage: torch – front power saving – front full power
- off. Adjust the inclina�on of the light to the desired posi�on up to 180 degree rota�on. Use the fixed magnet
on the base of the lamp or the magnets and hook on the back if desired. Low ba�ery warning: The front or the
torch (depending on actual switch stage) will flash 5 �mes 5 minutes before ba�ery runs out. The charging
indicator (1 x LED) on back of the lamp will be red when charging and green when fully charged.
All work lights are par�ally charged when delivered.
1. Charge the lamp fully before use. Note: the Micro USB can only be inserted into the lamp in one way.
2. Use the USB charging cable enclosed with the lamp to connect to a PC or any other suitable USB port.
3. Do not turn on when charging.
4. Do not use a modified or damaged charging cable or charger.
5. Do not leave on charge for over 24 hours.
6. Recharge every 3 months when not in use.
Cleaning:
Allow the work light to cool down sufficiently before cleaning. Clean with a dry or slightly moist, clean cloth.
Do not use cleaners that contain abrasives or solvents.
Environmental Protec�on:
The crossed-out wheeled bin symbol indicates that waste electrical and electronic products (WEEE) should be
disposed of separately from the municipal waste stream via designated collec�on facili�es appointed by the
government or the local authori�es.
August 2017
6 x 1.2W (front) / 1W (torch)
125 + 250 (front) / 80 (torch)
6000K
CRI 95+ (front)
ABS, non-rubberized
Durable PC, clear
IEC III / IP54 / IK07
3.7V – 2600mAh – 9.62Wh - Lithium rechargeable ba�ery
DC5V – 1A (max)
3.5 / 4 + 8 (front) - 10 (torch)
-10°C to +40°C
20 x 4.8 x 3 cm
180 g
GB
www.elwisligh�ng.com