Special Features - Nevir NVR-416T Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

RECORDING
Recording from Radio
Set the FUNCTION switch (2) to the RADIO position.
Tune in desired radio station.
Open the Cassette Compartment Door (12) by pressing the STOP/EJECT button (6)
and insert a blank tape into the cassette compartment. Close the door gently.
Press the RECORD button (10) and PLAY button (9) simultaneously to start the
recording process.
Press the STOP/EJECT button (6) when finished.
Note:
You may want to monitor playback during recording. You can adjust the sound with
the VOLUME control (1). This adjustment does not affect the content of recording.
Recording from Built-in Condenser Microphone
Set the FUNCTION switch (2) to the MIC position.
Open the Cassette Compartment Door (12) by pressing the STOP/EJECT button (6)
and insert a blank tape into the cassette compartment. Close the door gently.
Press the RECORD button (10) and PLAY button (9) simultaneously to start the
recording process. This process will record the signals that are received by the
built-in Condenser Microphone (4).
Press the STOP/EJECT button (6) when finished.
Note:
Monitoring during MICROPHONE recording is not possible.
Prevention Against Accidental Erasure
To prevent a recording, e.g. side A, on the cassette tape from being erased
accidentally, break off the tab on the rear of the tape. Now, recording on side A is
no longer possible. If you wish to make side A recordable again, cover the hole
with adhesive tape.

SPECIAL FEATURES

Automatic Stop
During playback or recording, the unit will shut itself off automatically at the end of
tape.
-Page 4

Publicidad

Tabla de contenido
loading

Tabla de contenido