Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE
- This appliance is for household use only. Use iron only for its
intended use.
- Please check the voltage of the iron if it is the same with the one in
you home.
- To avoid a circuit overload, do not operate another
high-wattage appliance on the same circuit. To
protect against risk of electrical shock, do not
immerse the iron in water or other liquids.
- After using, turn the temperature control knob off or
to "MIN".
- Keep the cord away from the hot soleplate. Let iron cool
completely before putting away.
- Always keep the instruction manual, in case the iron is
passed to a third person, please hand over the
manual together.
NOTE
- Remove any labels, stickers or protective foil that may be
attached to the body or soleplate of the iron
before first use.
- The iron may give off some smoke and emit an odor
when you first use. This will cease after a short
while. It is safe and will hot harm the
performance of the iron.
FILLING WITH WATER
- Remove the mains plug from the wall socket before filling the iron.
- Set the steam button to position "0" or " " or " "and open the
water inlet cover.
- Please fill your iron with normal tap water before using for the first
time.
-
Use the water beaker attached to fill clean tap water into water tank
until "MAX" filling level.
- For refilling, you can also use tap water. However, if
the water is very hard it is advisable to use distilled
water.
-
Replace water inlet cover and dry the spilt
water around the enclosure of the appliance.
- Do not fill the tank beyond the MAX
HOW TO USE
Publicidad
