Publicidad
Idiomas disponibles
Idiomas disponibles
DELAY FUNCTION
If you do not want the coffee maker to start operation immediately, for example now it is 8:10 am, you hope that the
coffee maker will automatically start at 1:00 pm, first follow steps 1 to 5 of above section, and then you can set the
automatic start function as follows:
1) Press PROG button for the first time, the word CLOCK is showed at the up-right
corner on display.
2) Press the HOUR and MIN button continuously to set the present time (real clock),
that is AM 8:10(See fig. 1).
Note: The time cycle is 12 hours.
3) Press PROG button for the second time, the word TIMER shows on up-left c
orner of display.
4) Set the delayed starting time by pressing HOUR and MIN button repetitively, that is PM 01:00 (see Fig. 2).
5) Press the PROG for the third time, the indicator of DELAY is illuminated and the LCD will display the current clock.
Note 1: You may cancel the automatic start function by pressing PROG again. If you want to change the automatic start
time, only following the above 1-4 steps again.
Note 2 ： The appliance will begin working if you press ON/OFF button.
6) When the time is due the indicator of DELAY will be off, while the indicator of BREW turn on and the unit starts
brewing. The appliance will be cut off power automatically after two hours if it has not been manually disconnected at
the completion of brewing.
CLEANING AND MAINTENANCE
CAUTION: Be sure to unplug this appliance before cleaning. To protect against electrical shock, do not immerse c
ord, plug or unit in water or liquid. After each use, always make sure plug is first removed from wall outlet.
1) Clean all detachable parts after each use in hot, sudsy water.
2) Wipe the product's exterior surface with a soft, damp cloth to remove stains.
3) Water droplets may buildup in the area above the funnel and drip onto the product base during brewing. To control
the dripping, wipe off the area with a clean, dry cloth after each use of the product.
4) Use a damp cloth to gently wipe the warming plate. Never use abrasive cleaner to clean it.
5) Replace all parts and keep for next use.
6） Any other servicing should be performed by an authorized service representative.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating efficiently, you should clean away the mineral deposits left by the water regularly
according to the water quality in your area and the frequency use the appliance, the detail is as follows:
1. Fill the water tank with water and descaler to the MAX level as indicated in the water tank. (The scale of water and descaler
is 4:1, the detail refers to the instruction of descaler. Please use "household descaler", you can use the citric acid instead of
the descaler (the one hundred parts of water and three parts of citric acid).
2. Put the carafe on the warming plate and ensure it is placed in position.
3. Press the ON/OFF button once and the indicator of BREW will be illuminated. After a while, water will drop out automati-
cally.
4. After percolate the equivalent of one cup and then switch off the appliance by pressing the ON/OFF button again.
Publicidad
