Worx WX252 Manual Original página 8

tool's operation. If damaged,
have the power tool repaired
before use. Many accidents are
caused by poorly maintained
power tools.
f) Keep cutting tools sharp and
clean. Properly maintained
cutting tools with sharp cutting
edges are less likely to bind and
are easier to control.
g) Use the power tool,
accessories and tool bits
etc. in accordance with
these instructions, taking
into account the working
conditions and the work to be
performed. Use of the power
tool for operations different from
those intended could result in a
hazardous situation.
EN
h) Keep handles and grasping
surfaces dry, clean and free
8
from oil and grease. Slippery
handles and grasping surfaces
do not allow for safe handling and
control of the tool in unexpected
situations.
5) Battery tool use and care
a) Recharge only with the
charger specified by the
manufacturer. A charger that
is suitable for one type of battery
pack may create a risk of fire
when used with another battery
pack.
b) Use power tools only with
specifically designated
battery packs. Use of any other
battery packs may create a risk of
injury and fire.
c) When battery pack is not in
use, keep it away from other
metal objects, like paper clips,
coins, keys, nails, screws or
other small metal objects,
that can make a connection
from one terminal to another.
Shorting the battery terminals
together may cause burns or a
fire.
d) Under abusive conditions,
liquid may be ejected from
the battery; avoid contact. If
contact accidentally occurs,
flush with water. If liquid
contacts eyes, additionally
seek medical help. Liquid
ejected from the battery may
cause irritation or burns.
e) Do not use a battery pack
or tool that is damaged
or modified. Damaged or
modified batteries may exhibit
unpredictable behaviour resulting
in fire, explosion or risk of injury.
f) Do not expose a battery pack
or tool to fire or excessive
temperature. Exposure to fire
or temperature above 130 °C may
cause explosion.
g) Follow all charging
instructions and do
not charge the battery
pack or tool outside the
temperature range specified
in the instructions. Charging
improperly or at temperatures
outside the specified range may
damage the battery and increase
the risk of fire.
6) Service
a) Have your power tool
serviced by a qualified repair
person using only identical