Publicidad
Idiomas disponibles
Idiomas disponibles
Channel mode (MR): is used to select pre-programmed channels.
Example no. 1
Programming a Channel Repeater Offset with CTCSS Tone
New memory in Channel 10:
RX = 432,000 MHz
TX = 437,000 MHz (+ 5) Offset
CTCSS TX tone 123.0
1.
Long press MENU key to switch to VFO frequency mode. The VFO icon appears on the
right side of the screen.
2.
Execute the key sequence [MENU] [2][9] [MENU] [0] [1] [0] [MENU] to delete all data
previously stored on channel 10 (for example).
3. Execute the key sequence [MENU] [1][3] [MENU] 123.0 [MENU] [EXIT] to enter the TX
code tone.
4. Enter the RX frequency (Ex. 432000)
5. Execute the key sequence [MENU] [2][8] [MENU] [0] [1][0] [MENU] to select channel
10 (for example)
6. The RX frequency has been added.
7.
Enter the TX frequency (Ex. 437000)
User manual
24
Publicidad
