Proline BOX 90 IX Manual De Instrucciones página 12

1.Position the hood against the wall and mark the position of the support holes (A, B, C,
D and E) that are to be drilled.
2.Use a drill bit with an 8 mm diameter to make holes in the wall where you have
marked these positions.
3.Insert the supplied wall plugs in the holes and fix the hanging plate on the holes A, B
and E with the supplied 4 x 40 mm screws.
4.Hang the hood on the two hooks (F and G) and fix it onto the wall by tightening the
supplied 4 x 30 mm screws into the wall plugs in C and D.
5.Fix the outer chimney on the top of the hood using the supplied screws.
GB
4