5. If the MP3 disc or storage device has folder, when reaching the beginning of the folder, press the
SKIP/TUN
button will go to the last file of the previous folder.
Different Play Mode
Press the MODE/MEM button to select different kinds of play mode with the following sequence.
For CDA files : Repeat One Æ Repeat All Æ Normal
For MP3 files : Repeat One Æ Repeat Folder Æ Repeat All Æ Normal
Repeat 1 – repeat the track being played.
Repeat All – repeat all the tracks in the storage device.
Repeat Folder – repeat the tracks in the entire album/folder.
Normal – play the tracks in sequence.
Programming
The programming should be done during STOP mode
1. Press the MODE/MEM/PROG button, the display will show P01.
2. Use the SKIP/TUN+ or SKIP/TUN button to select the desired track.
3. Press the MODE/MEM/PROG button again to store the selected track in the memory, the display will
show P02.
4. Repeat steps 2 to 3 to store more tracks in the memory. For Audio CD, you can store up to 20 tracks
in the memory and for MP3 disc files, you can store up to 99 tracks in the memory.
5. Press the PLAY/PAUSE button to start playing the disc in the programmed order.
6. To stop playing, press the STOP/M+ Button.
7. To cancel the programming list, press the STOP/M+ button and open the CD compartment door or
press the /SOURCE button to select a different mode.
AUX/MP3-IN
CONNECTION
1. Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line-out jack or
phones jack on your MP3 player and the other side to the aux-in jack on the unit.
2. Press the /SOURCE button to select AUX mode.
3. Turn on your MP3 player and follow the playback instruction.
4. To stop this function, simply turned off your MP3 player.
Note:
Because of non-standardized format definition/production of MP3 format, playback quality &
performance are not guaranteed.
Manufacturer is not responsible for the playability of MP3 in any case due to recording conditions such
as PC performance, writing software, media ability and etc.
P-5