Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
To remove an accessory
a. Make sure that the lock on/off button (E) is in the lock position and remove the battery from
the tool.
b. Turn the clamping lever (D) on the top of the tool counterclockwise until you hear a "click"
to signal that the lever has been fully engaged to unlock the clamping mechanism.
c.
Remove the accessory from the tool.
NOTICE: If using an optional STARLOCK accessory, rotate the locking pin (A) 90 degrees
clockwise, and then pull it out (Fig. 5c).
WARNING
• Don't let the locking pin face the ground when removing an accessory, it may cause the
accessory to fall unexpectedly.
6. Using Accessories
WARNING
• Always wear safety goggles or safety glasses
with side shields during power tool operation. If
the operation is dusty, also wear a dust mask.
WARNING
• Wear protective gloves.
WARNING
• Use sharp, undamaged blades only. Deformed,
blunt, or otherwise damaged blades can break.
WARNING
• Do not attach the accessories in such a way that they face backward (Fig. 6). Operation in
this position may cause serious injury.
6
11
Publicidad
