Aroma-Zone UO-1063 Manual De Instrucciones página 3

Function and Data:
Capacity: 500g
Graduation: 0.1g
Accuracy : 0.1g
Overload weight: 510g +/ - 0.5g
Auto shut off time: 3 minutes
Measure units: g, oz, dwt, ozt
Button details:
ON/OFF: switch On or Off the scale
TARE: Tare button
MODE: Unit change button (g, oz, dwt, ozt)
CAL : Calibration button
Operation Instruction:
Put the scale on the table before weighing, then press ON/OFF button, you could weigh after the scale show zero.
The weight of the goods can not exceed the capacity of the scale, or it will effect the precise of the scale, even
destroy the scale.
Use the scale in the condition of shake, the showing number will be changed.
If you do not use the scale, please shut off the scale in order to save power of batteries.
If the scale show "LO" and automatic shut off, please change battery.
Notice:
The scale must be put balanced. The table can not be shaked when weigh.
Do not press the scale's tray. The weight can not be exceed the maximum capacity of the scale, or it will destroy
the scale. When weigh, please put the weight in the mid dle of tray of the scale.
Do not put the scale in a wet place in order to avoid the inaccurate results even destroy the scale.
Battery:
Use 2 batteries AAA LR03 1,5 V.
Remove the battery location cap and put the batteries into while verifying to put them in the right way. Put back the
cap.
If you don't use the scale for a while (more than a month), we advise you to remove the batteries.
Do not leave worn piles within reach the children, never try to reload not refillable piles, never trough them in the
fire.
Calibration Step:
Calibration allows to settle the balance to obtain a faithful behavior during the recording or the reproduction of
measures.
1. Turn into ON the button of the scale.
2. Press « CAL » button and keep it pressed for 2 sec until it the display shows « 0.0g ».
3. Press « CAL » button again and it will display « 200.0g ».
4. Put a 200-gram weight on the middle of the tray and then press the « CAL » button again. The display
will show « PASS », then « 200.0g ».
Remove the weight of the tray and turn OFF the scale. Calibration is complete.
Notice:
Please keep the tray of scale balance during the calibration, or the date will be inaccurate after calibration.
With proper treatment, your scale will provide years of reliable service. It may be necessary to calibrate the scale
prior to use. Please prior read ALL operating instructions carefully before use.
PROPER HANDLING
Avoid exposure to extreme heat or cold. Your scale should be operated at a normal room temperature. Always
allow the scale to adjust to room temperature for one hour per degree change before use.
Give your scale sufficient warm up time. It usually takes 20 - 60 seconds for the internal components to stabilize.
CARING FOR YOUR SCALE
Your scale should be kept in a clean environment free from dust, dirt, moisture, and vibration. Do not place close
to other electronic equipment.
All can adversely affect the reliability and accuracy of your scale. Handle with care. All items to be weighed should
be placed gently onto weighing surface. Although this scale is designed to be quite durable, rough treatment may
permanently damage the internal sensor.
Avoid shaking, dropping or otherwise shocking the scale. This is a precision instrument and must be handled with
extreme care. Only operate the scale on a stable, vibration free surface.
Thank you for buying the pocket scale UO-1063 500g.
Please carefully read all the instructions above before the first use of your scale.
WARRANTY : 1 year. Warranty cannot cover damages caused by a wrong use or a wrong storage of the scale.
In case of any problem, you can contact our After-sales service:
- By phone : +33 4 73 34 37 88
- by e-mail : contacts@aroma-zone.com
Instruction manual for Pocket scale UO-1063 500g
AROMA-ZONE
(File reference: GC022-A, 29/01/10)