Husky HOTC4609BJ5M Guía De Uso Y Mantenimiento página 7

Operation
1
Locking and unlocking the unit
IMPORTANT : The drawers must be fully closed before
locking / unlocking the unit.
□ To lock the unit, insert the key (I) into the lock (J) and turn
it one quarter turn counterclockwise. Then remove the key.
□ To unlock the unit, insert the key (I) into the lock (J) and
turn it one quarter turn clockwise. Then remove the key.
I
3
Lifting the extendable table
□
Lift the extendable table (O) to raise into position.
The fold-out legs (N) will spring open automatically and stop
by the stoppers beneath the woodtop.
□
After the fold-out legs (N) are open, pull out the pin on the leg
(N) and insert it back when leg is in full length for each side.
Adjust the leveling feet (S) down to the floor until they are
steady.
N
2
Removing/installing the drawers
Removing the drawers -
□ Fully extend and empty the drawer.
□ On the slide, lift up the plastic release lever on one slide
and push down the plastic release lever on the other slide.
Gently pull the drawer out so the slides can ride over
the stops.
Installing the drawers -
□ Pull the slides and slide carrier out until fully extended .
□ Hold the slide on the cabinet while aligning it with
the slide on the drawer.
□
Slightly insert one side and repeat for the other side.
□ Slowly push the drawer until it is fully closed to
engage the slide.
□ Open the drawer and close it to verify proper
operation.
4
Lowering the extendable table
□ Before pushing fold-out legs (N) back, adjust the leveling feet
(S) up from floor and shorten the leg back to up position.
□ Lower the extendable table (O) when not in use. Lift the
extendable table top (O) slightly, push fold-out legs (N) to back
position and let it down slowly.
O
N
N
S
7
S
Please contact 1-888-HD-HUSKY for further assistance.
O
HUSKYTOOLS.COM