Publicidad
Idiomas disponibles
Idiomas disponibles
!
To reduce the risk of personal injury, unplug before cleaning or servicing.
Maintenance
Any other servicing should be done by an authorized service representative.
If appliance is not working as it should, has been dropped, damaged, left outdoors,
or dropped into water, take it to a service center prior to continuing use.
Hoover
REACT
vacuums should have regular maintenance checks to maintain
®
TM
optimal performance and suction. Refer to this manual or your Hoover App to learn
how to maintain your vacuum.
Notice: A Thermal Protector has been designed into your cleaner to protect it from
overheating. When the Thermal Protector activates, the cleaner will stop running. If
this happens proceed as follows:
1. Turn cleaner OFF and unplug it from the electrical outlet.
2. Empty the dirt cup.
3. Inspect the nozzle inlet, hose connector, hose, dirt cup inlet, cyclonic filter,
rinsable filters and HEPA filters for any obstructions. Clear obstructions
if present.
4. When cleaner is unplugged and motor cools off for 30
minutes, the Thermal Protector will deactivate and
cleaning may continue.
If the Thermal Protector continues to activate after following the
above steps, your cleaner needs servicing. Refer to the
Warranty section in the user manual for servicing information.
Emptying the Dirt Cup:
1. Remove dirt cup by pressing the dirt cup release
button.
2. Hold dirt cup over a trash can and press the dirt
cup trap door release to empty the dirt cup.
Tip - Empty dirt cup after every use to maintain
optimal performance.
12
WARNING
!
Dirt Cup Release
Empty Dirt Cup
WARNING
!
Do not use vacuum without dirt cup and dry filters.
!
Publicidad
