Publicidad
Idiomas disponibles
Idiomas disponibles
Unfolding the stroller
To unfold the stroller, lay it flat on the ground (Fig. 1, 2),
release the frame lock on the side and pull the handle
up until the folding mechanism engages (Fig. 3).
Caution. Make sure the stroller is unfolded properly
before use.
Mounting the rear axle
To assemble the rear axle, place it together with the
brake system on the frame until the rear axle is audibly
engaged on both sides (Fig. 4).
Mounting and dismounting the
rear wheels
To remove the rear wheels, press the pushbutton in the
wheel hub and pull the wheel from the axle at the same
time (Fig. 5) and pull the wheel from the axle. To reas-
semble, press the pushbutton and push the wheel onto
the axle until it clicks into place.
Attention! Before use, make sure that all wheels are
correctly mounted.
Mounting and dismounting of the
swiveling front wheels
Push the pins of the front wheels until they engage in
the front structure to mount them (Fig. 6, 7). Press the
rectangular push button (Fig. 8) located on the front of
the wheel joint and pull the wheels off the metal pins of
the front assembly to disassemble them.
The front wheels swivel and have locks to drive straight.
Turn the plastic ring underneath the joint until it clicks
into place (Fig.9) to lock the wheels.
Parking brake
The stroller is equipped with a parking brake on the
rear axle. Press the brake pedal to lock the wheels (Fig.
10). Lift the pedal to release the brake.
Always lock the brake when parking the stroller on un-
even ground.
The brake is not used for slowing down while driving
and should only be locked when the stroller is at a com-
plete standstill. The stroller is not suitable for walking.
Attention. Before driving, make sure that the brake is
released.
1
3
5
7
9
2
4
6
8
10
Publicidad
