Braun BC10 Instrucciones Para El Usuario página 2

English
Battery precautions
1. Do not use rechargeable batteries.
2. Use only alkaline AA batteries of the same or equivalent type.
3. Insert batteries with the correct polarity.
4. Keep batteries away from children.
5. Dispose of exhausted batteries according to local legal
requirements. Do not dispose them by throwing away with
normal household rubbish.
6. Avoid short circuiting the contacts in the battery compartment
and battery terminals.
7. Remove batteries from the unit if it will not be used for long
period of time.
8. Exhausted batteries should be removed from the battery
compartment to prevent over-discharge, which can cause
leakage and may cause damage to the clock.
Getting started
1. Remove the battery door.
2. Insert 2xAA size new batteries (use good branded alkaline
batteries) as indicated in the battery compartment, and press the
"reset" key to reset the clock. The display will turn on after a few
seconds.
3. Close the battery door.
Function keys
TIME SETTING / NEUTRAL / ALARM SETTING switch
- Slide the switch to the TIME SETTING position to set the clock
time.
- Slide the switch to the ALARM SETTING position to set the alarm
time.
- Slide the switch to the NEUTRAL position to exit the setting
mode and return to normal display.
+ Key
- When the setting switch is in the NEUTRAL position, press the +
key to change between 12 and 24 hour display format.
- In TIME SETTING or ALARM SETTING mode press to increase the
setting value. Press and hold to speed up the setting.
- Key
- When the setting switch is in the NEUTRAL position, press the -
key to change the temperature display between °C and °F format.
- In TIME SETTING or ALARM SETTING mode press to decrease
the setting value. Press and hold to speed up the setting.
ALARM ON / OFF slider
- Shift the ALARM ON / OFF slider up to enable the alarm.
- Shift the ALARM ON / OFF slider down to disable the alarm.
SNOOZE / LIGHT touch button
- Tap to turn on the backlight for 10 seconds.
- Tap to stop the alarm and activate the 5 minute snooze function.
RESET key
- Press by using a pin to reset all values to default. In case of a
malfunction, the unit has to be reset.
CALENDAR SETTING button
- Press CALENDAR SETTING button to set year/month/date.
BACKLIGHT ON /OFF switch
- Slide the switch to ON position to enable the night light mode.
- Slide the switch to OFF position to disable the night light mode.
Product description (Image 1)
1. LCD display
2. SNOOZE / LIGHT touch button
3. ALARM ON / OFF slider
4. TIME SETTING / NEUTRAL / ALARM SETTING switch
5. + Key
6. - Key
7. Battery compartment
8. RESET key
9. CALENDAR SETTING button
10. BACKLIGHT ON / OFF switch
11. Light sensor
Display details (Image 2)
A. Time
B. AM / PM indicator (for 12 hour format)
C. Alarm time
D. Alarm icon
E. Temperature
F. Month
G. Date
H. Low battery indicator
Setting the time
1. Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to
the TIME SETTING position.
2. Press the '+' or '-' key to set the desired value. Press and hold the
'+' or '-' key to speed up the setting.
3. Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to
the NEUTRAL position to return the normal display and save the
settings.
Setting the year, date and month
1. Press the CALENDAR button.
2. Press the '+' or '-' key to set the current year. Press and hold the
'+' or '-' key to speed up the setting. Press the CALENDAR button
to save this setting.
3. Press the '+' or '-' key to set the current month. Press and hold
the '+' or '-' key to speed up the setting. Press the CALENDAR
button to save this setting.
4. Press the '+' or '-' key to set the current date. Press and hold the
'+' or '-' key to speed up the setting. Press the CALENDAR button
to save this setting and exit the CALENDAR mode.
Setting the alarm
1. Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to
the ALARM SETTING position.
2. Press the '+' or '-' key to set the desired value. Press and hold the
'+' or '-' key to speed up the setting.
3. Slide the TIME SETTING / NEUTRAL / ALARM SETTING switch to
the NEUTRAL position to return the normal display and save the
settings.
Using the alarm and snooze function
1. Enable the alarm by shifting the ALARM ON / OFF slider up (so
the green detail is visible). The bell icon will appear on the LCD
display.
2. Tap the SNOOZE / LIGHT touch button to stop the alarm and ac-
tivate the snooze function. When the snooze function is activated,
the bell icon will flash.
3. To disable the alarm and snooze function, shift the ALARM ON /
OFF slider down. The bell icon will disappear.
Note: When the snooze function is activated, the alarm will auto-
matically start again after 5 minutes. The snooze function will not
stop unless the ALARM ON / OFF SLIDER is shifted down.
Setting the night light
- Slide the BACKLIGHT switch to ON position to enable the night
light mode.
- Slide the BACKLIGHT switch to OFF position to disable the night
light mode.
Note: The backlight will only turn on in low-light conditions, such
as in a dark room. If this feature is used continuously, the battery
life will be greatly reduced.