Publicidad
Idiomas disponibles
Idiomas disponibles
immediately remove the power plug or power adaptor from the socket. If the device is
powered, do not put hands in the water. Have the device checked by the qualified
electrician before using it again.
18. Do not touch the device or power adaptor with wet hands.
19. The device has to be turned off after every use.
20. In order to provide additional protection, it is recommended to install residue current
device (RCD) in the power circuit, with residual current rating not more than 30 mA.
Contact professional electrician in this matter.
21. If the device utilises a power adaptor, do not cover it, because this can cause a
dangerous temperature rise and can damage the device. Always connect the power
adaptor cable to the device, and then connect the power adaptor to the power socket.
22. Do not use the blanket folded. Do not pin pins, needles or other metal objects into the
electric blanket.
23. Do not use the blanket if it is wet or damp. Leave the blanket loosely hung out in a
well-ventilated area until it is completely dry.
24. Do not place the power cord on the hot blanket.
25. Store in a dry place. Never place heavy objects on the blanket.
26. Never go to sleep with the electric blanket turned on. Disconnect the plug from the
outlet.
27. Never cover the controller.
28. Prior to turning the electric blanket on make sure that it is evenly laid out and that
there are no kinks or folds.
29. The electric blanket may not be washed in a washing machine. It may be hand
washed. Before washing disconnect the power cord and controller.
30. Do not iron the electric blanket!
31. The electric blanket may not be used for medical purposes in hospitals.
32. The device should be cooled prior to storing.
33. The device may be used only with the types of removable elements specified in the
labeling of the device
34. Do not use the device on adjustable beds. If the device is used on an adjustable bed,
make sure that the blanket and cord cannot get jammed or rucked e.g. on hinges.
DESCRIPTION OF THE DEVICE
1.
Temperature regulator
3.
Sheet
USING THE DEVICE
Temperature regulator:
1.
level 0: electric blanket turned off
2.
level 1: electric blanket turned on - lower temperature
3.
level 2: electric blanket turned on - higher temperature
To use:
Before connecting the electric blanket to a power source always make sure that the temperature regulator is set to the 0 position. Check
if the blanket is evenly laid out and is not folded or rolled. The electric blanket may only be covered by a light fabric to allow a free flow of
heat.
2.
Power cable
4
Publicidad
