Mondial BE-02 Manual De Instrucciones página 19

CLEANING YOUR MONDIAL ELECTRIC SHAVER
To ensure a perfect cut, the device must be cleaned regularly.
General
• Make sure the ON/OFF Button is in the 0 off position.
• For external cleaning, use a dry or slightly damp, soft cloth to avoid scratching the surface
finishing material.
• Clean the inside and outside of the Protection Cap with the brush or wash it with a neutral
detergent, rinsing it well. Dry it with a paper towel.
• Never use steel wool, scrubs or any abrasive products, to avoid damaging the appliance.
• Never use compressed air, abrasive cleaning agents or aggressive liquids such as gasoline or
acetone to clean the device.
• Never dip the product in water.
• Store it back in the box to avoid any damage.
Cleaning the Cutting Blades
• The blades have a shelf life, and to keep the shaver operating
properly, it is recommended that the blades be cleaned periodically.
• Press the Button to open up the Hair Chamber.
• Remove the Cutting Blades unit. (Fig.1)
• Turn the Blade Lock knob located in the center of the rear of the
Cutting Blade unit counterclockwise and remove the Blade Lock.
(Fig. 2)
• Remove the cutter heads and use the Cleaning Brush to clean all the
blades. (Fig. 3) (Fig. 4) (Fig. 5)
• Also use the Cleaning Brush to clean the Cutting Blade Lock.
• Replace the cleaned Cutter Heads into the Cutter Blade unit and
make sure that the projections on the heads fit snugly into their
housings.
• Put the Blade Lock back on the Cutter Blade unit and turn the central
knob clockwise.
• Fit the Cutting Blades unit to the top of the shaver and tighten until
you hear it click into place.
(Fig. 3) (Fig. 4)
(Fig. 1)
(Fig. 2)
(Fig. 5)
19