Descargar Imprimir esta página

CASO DESIGN LX20 Manual Del Usuario página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
3.4 Disposal of the packaging
Caso believes in the importance of recycling and has selected packaging materials that
not only protect your unit from damage during transit, but can be recycled to minimize
ecological impact. Recycling the packaging materials preserves raw materials and
reduces waste. Take any packaging materials that are no longer required to a recycling
collection point for proper disposal.
Please note
► If possible, keep the original packaging for the device for the duration of the guarantee
period in the event a return in necessary
3.5 Setup
3.5.1
Setup location requirements:
In order to ensure the safe and trouble-free operation of the device, the setup location
must fulfil the following prerequisites:
• The device must be set up on a firm, flat and horizontal surface with sufficient load-
bearing capacity for the scale and the maximum weight of the food that should be
weighed.
• Choose the setup location where children cannot reach the scale
• Do not set up the device in a hot, wet or extremely damp environment or near
flammable material.
3.6 Rating plate
The rating plate with the performance data can be founded on the back of the device
4 Operation and Handling
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
4.1 Batteries
Open the battery cover and put in 2 batteries (1,5V/ AAA – not included in delivery
scope).
4.2 Replacing the batteries
The symbol
appears if the battery needs replacing.When the
battery is low, the LED screen will show "LO" and scale will switch
off. Open the battery cover and replace the existing batteries with
new batteries. Pay attention to correct polarity.
During extended period of non-use always remove the batteries from
battery compartment.
5

Publicidad

loading

Este manual también es adecuado para:

3294