Publicidad
Idiomas disponibles
Idiomas disponibles
4....-05-HM 2737
Assembly of the Whisk/Kneading Hook/Beater
•
Press the two whisks or kneading hooks on the bottom by turning slightly until
they lock in place.
Note:
The kneading hook/whisk must be inserted into the correct opening of the mixer!
1. Please ensure that the speed switch (2) is turned to "0/OFF".
2. Connect the mixer to a properly installed power socket, 230 V, 50 Hz.
3. Insert the kneading hook or whisk into the food to be mixed.
Set the desired speed with the speed switch (2):
1. Kneading hook: butter, potatoes, light mixture
2. Whisk:
4. Tilt the machine slightly up and down.
Note: For optimum results use high-walled vessels that are not too large.
Turbo Switch (1)
This is for switching to maximum speed for a short time. Press at short intervals for
pulsed mode operation.
WARNING: Do not use this function for more than 2 minutes!
Releasing the kneading hook / whisk
In order to release the hook, press the release button (3).
•
Disconnect the machine from the mains.
•
Clean the machine after use with a dry cloth.
•
Clean the equipment in the usual way in soapy water.
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
18.07.2002 9:14 Uhr
Using the Machine
sauces, milk mix, etc., desserts, pudding, egg white,
frothy cream.
Cleaning
Seite 23
GB
23
Publicidad
