16 INSTALLATION
Assembling the Freezer Drawer
1
Pull out both rails simultaneously until they
are fully extended.
2
Grasp the drawer on each side and hook the
drawer supports into the rail tabs located on
both sides.
3
Lower the door into its final position and
insert the screws in the rails on both sides.
4
Insert the basket into the frame, and push the
drawer back until it clicks into place.
Assembling the Right Refrigerator
Door
CAUTION
• Install the right-side door first.
1
Make sure that the plastic sleeve is inserted in
the bottom of the door. Lower the door onto
the middle hinge pin as shown in the figure.
2
Fit the hinge
over the hinge lever latch
a
and slot it into place. Rotate the lever
counterclockwise to secure the hinge.
3
Connect all the wire harnesses
NOTE
• The number of wire harnesses may vary
depending on the model.
b
c
.
d