ABB Video kit Manual Del Usuario página 3

4 A B B - W E L C O M E V I D E O K I T
Terminal description - Mini Outdoor Station
7
6
5
4
3
2
1
13 12
Terminal description - Video Indoor Station 4.3
1 2
2 4 3
5 6
No. Description
1 Connector for device software update
2 Rotary switch to set the address of outdoor station (1-9)
3 Set feedback tone of pushbutton ON/OFF
4 Set general call to all indoor stations in one family: ON/OFF
11 If GC=ON, press button 1/button 2, all IS ring
10
5 Configurate round pushbutton
3 -> OFF; 4 -> OFF = Call IS 001
9
8
6 Set the video mode PAL/NTSC
OFF = PAL video mode
ON = NTSC video mode
Set default lock
7
OFF = set (Lock-GND) as default lock
ON = set (COM-NC-NO) as default lock
*Default lock is controlled by "unlock" button on IS
8 Plug-in clamps (a, b) for bus connection
9 Plug-in clamps (Exit-GND) for exit button
10 Plug-in clamps (Lock-GND) for door opener
11 Plug-in clamps (COM-NC-NO) for floating output, door opener
12 Rotary switch to adjust default door lock release time, 1-10s
13 Rotary switch to adjust loudspeaker volume
No. Description
1 Outdoor station selector switch
Set the address of the default outdoor station.
2 Indoor station selector switch
Selector switch X10 sets tens digits, selector switch X1 sets units
digits, Dip switches X100 and X200 set hundreds digits.
3 Primary/Secondary indoor station
Only one indoor station in each apartment can be set as
"Primary" (ON=Primary).
4 Terminal resistor switch
In video installations or mixed audio and video installations, the
switch must be set as 'RC on' on the last device of the line (ON=RC
on).
5 a1, b1 = bus connector
6 a potential free contact, such as a doorbell pushbutton
M A N U A L
Control elements - Video Indoor Station 4.3
No. Description
1 4.3" color display
2 Call button
1
• In standby status, press to access the "Intercom" screen
• During a call request, press to accept the call
• During communication, press to terminate the call
2
• During surveillance, press to activate the manual call
3 Unlock button
3
• In standby status, press to release the default lock of default out-
door station. Long press 3 seconds to enable/disable the "Auto
8
unlock" function on the primary indoor station
• During a call request or communication, press to release the
default lock of the outdoor station which is calling
9 5 6
4 7
• During surveillance, press to release the default lock of the out-
door station which is under surveillance
4 Surveillance button
• In standby status, press to monitor the default outdoor station
• During a call request, if "One on" mode is used on the (mini)
system controller, only the primary indoor station can show the
image, for the secondary indoor station this button needs to be
pressed to obtain the image
• During communication, long press to take a snapshot
• During surveillance, press to switch to the next video stream or
terminate the surveillance.
5 Mute button
• In standby status, press to activate/mute the ringtone
• In standby status, long press to mute the ringtone of all indoor
stations in the same apartment
• During a call request, press to activate/mute the ringtone and
the call will be terminated after 5 s
• During communication, press to activate/mute the microphone
6 Program button
In standby status, press to release the 2nd lock of the default
outdoor station by default. If multiple functions are set to the pro-
gram button, press to access the "Program button" screen.
7 Setting button
• In standby status, press to enter the system settings
• During communication or surveillance, press to set the volume,
colour, contrast and brightness
8 Microphone
9 Speaker
5