NORAUTO 2541473 Manual página 25

CONNECTING AND USAGE
EN
Note: Connecting this product incorrectly will destroy the power inverter and the electrical
equipment. Please follow the following steps and sequence and use the products properly.
WHEN USED IN A CAR
Connect the inverter with the DC cigarette lighter port when used in the car.
1. CAUTION: DO NOT REVERSE INPUT. Use a RED cord cable to connect the (+) of a
DC battery to the (+) terminal. And then, use a black battery cord to connect the (-)
battery to the (-) terminal.
2. Insert the cigarette lighter plug into the DC port of the vehicle. Then, turn on the power
inverter. The green LED light on the unit will turn on.
3. Insert the plug of the electric equipment into the AC socket of the power inverter.
Note: When using the power inverter in the car, do not exceed 150W. Otherwise, the
internal wiring in the car will be damaged and a danger may arise.
WHEN USED OUTSIDE OF A CAR OR EXCEED 150W
1. When using outside of a car or exceeding 150W, use the battery jumper cable clamps
to connect with the battery.
2. CAUTION: DO NOT REVERSE INPUT. Use a RED cord cable to connect the (+) of a
DC battery to the (+) terminal. And then, use a black battery cord to connect the (-)
battery to the (-) terminal.
3. Turn on the power inverter. The green LED light on the unit will turn on.
4. Insert the plug of the electric equipment into the AC socket of the power inverter.
PROTECTION AND RESTART WORK METHOD
Protection
Input low
voltage
alarm
Input low
voltage shut
down
Input over
voltage shut
down
Over load
protection
Over
temperature
shut down
Output short
circuit
Note: If the appliance is equipped with a USB port, the USB port can generally work under
all kinds of protection conditions.)
24
State description
LED light Alarm
Green on
Alarm
Red off
Green on
Alarm
Red on
Green on
No alarm
Red on
Green on
No alarm
Red on
Green on
Alarm
Red on
Green on
No alarm
Red on
AC output
When the battery's voltage returns to
AC have
the related voltage, the alarm stops
output
automatically.
When the battery's voltage returns to
No AC the related voltage, the inverter will
output normally work again. The green light
turns on, and the red light turns off.
When the battery's voltage returns to
No AC the related voltage, the inverter will
output normally work again. The green light
turns on, and the red light turns off.
Reduce the load to the related range.
No AC The inverter will normally work again.
The green light turns on, and the red
output
light turns off.
When the inside temperature returns
No AC to the related range, the inverter will
output normally work again. The green light
turns on, and the red light turns off.
No AC When the short circuit stops, the
output inverter restarts to work manually..
Restart work method