Cleaning Filters; Replacing Filters - Shark Rotator NV650 Serie Manual Del Propietário

Regularly clean and replace your filters to keep your vacuum's suction power optimal.
To clean filters, rinse with cold water ONLY to prevent damage from cleaning chemicals. Allow
all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being
drawn into electric parts.
IMPORTANT: DO NOT use soap when cleaning the filters.
Foam Filter
Filter Frame
Felt Filter
Pre-Motor (foam and felt):
With the dust cup removed, take out and
rinse the foam and felt filters with water.
Tap loose dirt off filters between washes
as needed.
CLEAN PRE-MOTOR FILTERS EVERY
3 MONTHS.
Follow the previous instructions for removing filters. The pre-motor filters should be replaced every
2.5 years. The post-motor HEPA filter should be replaced every 3 years.
Replacement
Pre-Motor Foam &
Felt Filter Kit
XFF650
NOTE: To order replacement parts and filters, visit sharkaccessories.com.
s h a r kc l e a n . c o m
CLEANING AND REPLACING THE FILTERS

CLEANING FILTERS

REPLACING FILTERS

Replacement
HEPA Filter
XHF650
HEPA
Post-Motor (HEPA):
To access the HEPA Filter, pull the latch
under the filter cover and take off the cover.
Take out the HEPA filter and rinse it.
CLEAN HEPA FILTER EVERY YEAR.