LG LX5450 Manual página 54

Select Port (Menu
This setting enables you to select the port.
1. Press Left Soft Key
2. Press Settings.
3. Press 1X Data and then press
4. Select an option and press
USB/RS-232C(COM Port)/Closed
Port Speed (Menu
This setting enables you to set the port speed.
1. Press Left Soft Key
2. Press Settings.
3. Press 1X Data and then press
Speed.
4. Select an option and press
19200/115200/230400
Set the port speed based on your carrier's
network. Contact your carrier to determine the
maximum available speed.
NOTE: When using the 1X HSPD data service
via an RS-232C data cable, the port speed is set
to 115,200. (230,400 is not supported). When
using the 1X HSPD data service via a USB data
cable, you may get better port speed if the port
speed is set to 230,400 rather than 115,200.
106
All manuals and user guides at all-guides.com
LX5450
)
Menu.
Select Port.
.
)
Menu.
Port
.
Mode(1X/QNC) (Menu
This is setting enables you to set the speed for WAP,
BREW and Tethered Mode.
1. Press Left Soft Key Menu.
2. Press Settings.
3. Press 1X Data and then press
Mode(1X/QNC).
4. Select an option and press
Auto/1X/QNC
PAP ID (Menu
It is the user's ID for PPP Authentication Protocol.
1. Press Left Soft Key Menu.
2. Press Settings.
3. Press 1X Data and then press
4. Enter a PAP ID and press
PAP Password (Menu
It is the user's password for PPP Authentication Protocol.
1. Press Left Soft Key Menu.
2. Press Settings.
3. Press 1X Data and then press
Password.
4. Enter a PAP Password and press
LX5450
)
.
)
PAP ID.
.
)
PAP
.
107