Replacement of the interior lights
Warning: To avoid an electric shock, unplug the unit when replacing the lamp bulb.
The lamp base is E26; the rated power of the bulb is 15W. Use a bulb of the same rating
when replacing. When replacing a light bulb, remove the screw at the back of the lamp,
then, to release the cover, push it firmly backward and then carefully pull down. Replace
bulb with the same size and type of bulb and fix the cover back into place.
Protecting waterproof seals
WARNING!
Do not open the electrical control box on the upper rear panel of this
appliance since this will break the waterproof seal around the control box. When this box is
serviced by a professional, a waterproof sealant must be applied to the box after
maintenance.
Similarly, do not attempt to open the digital control panels on the doors of the unit. This will
damage the waterproof seal around the panels.
9