Publicidad
Overview
The instruction
is as follows
(1) Press the Power button (located at the bottom) of the Bluetooth 5.0 mouse before paring it
with your computer for the first time.
(2) Turn on the Bluetooth function of your computer and make it discoverable.
(3) Press and hold the "Connect" button (Red) located at the bottom of the mouse, hold it until
you see the indicator LED (next to the scroll wheel) starts flashing in between red and blue,
then release. Now, the pairing process is started.
(4) Two Bluetooth modes are available from the mouse and they will be recognized by your computer.
Choose the Bluetooth mode for your computer depends on its Bluetooth version.
(5) The indicator LED will turn to Blue and dim out after 6 seconds if the pairing is successful.
The mouse is ready to use.
(6) The indicator LED will stop flashing and dim out if the pairing is unsuccessful within 2 minutes.
Users can repeat the step 2-5 to pair again.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
2
1
How to charge the NX-9000BT
with a Micro USB cable
LED indicator
• Pairing: The indicator LED (next to the scroll wheel) starts flashing in
between red and blue until pairing success.
• Charging: Red LED light is ON.
• Fully charged: LED light is OFF.
• Battery low: Red LED will flash at a slow speed to indicate low battery power.
3
Factory Settings
1. Left Button: Provides traditional mouse functions like
1. Left Button: Provides traditional mouse functions like
click, double click and drag.
click, double click and drag.
2. Magic-Roller: Press the "Magic-Roller" to surf the
2. Magic-Roller: Press the "Magic-Roller" to surf the
Internet and Windows documents.
Internet and Windows documents.
3. Right Button: Provides traditional mouse click
3. Right Button: Provides traditional mouse click functions.
functions.
USB
Port
Micro USB Port
Connect
Power
Switch
Publicidad
