3 Unpacking and installation
12
Local regulation for Great Britain
WARNING IMPORTANT
This appliance must be earthed.
The wires in the mains lead are coloured in accordance with the following code:
Green and yellow
Earth
Blue
Neutral
Brown
Live
If the plug provided is unsuitable for socket outlets, the plug must be cut off and suitable
plug fitted. The cut-off plug should be disposed of and must not be inserted into any 13
amp socket as this can result in electric shock. The plug or adapter or the distribution
panel should be provided with 13 amps fuse. As the colours of the wires in the mains
lead of this appliance may not correspond with coloured markings identifying the
terminals in your plug, proceed as follows:
The green and yellow wire must be connected to the terminal in the plug which is
marked with the letter E or by the earth symbol, or coloured green, or green and yellow.
The blue wire must be connected to the terminal which is marked with the letter N or
coloured black.
The brown wire must be connected to the terminal which is marked with the letter L or
coloured red.
Note:
After replacing or changing a fuse, the fuse cover in the plug must be replaced
with a fuse cover which corresponds to the colour of the insert in the base of the
plug or the word that is embossed on the base of the plug, and the appliance
must not be used without a fuse cover.
Only 13 Amps fuse approved to B.S. 1362 A.S.T.A. should be used.
Switch on the power. Each time the instrument is turned on a self diagnostic test is done.
If an error is detected during the test a message will appear on the display and an alarm
will sound.
Electrophoresis Power Supply EPS 3501 User Manual 18-1130-21 Edition AD