Device Description; Initial Use - Beurer BY 76 Manual De Instrucciones

5.

Device description

Overview
1. Pole
2. Lid with steam opening
3. Bottle grille
4. Basket for small parts
5. Fixing aid
6. Gripping tongs
7. Sterilisation container
with heating element
8. Digital display
9. switch
10. Mains cable
11. Cable compartment
12. Measuring jug
6.

Initial use

1. Before use, ensure that the device and accessories (including mains cable) do not have any vis-
ible damage.
2. Place the device on a firm, level surface.
3. Put all the included parts of the steriliser together:
– Insert the pole into the designated opening on the bottle grille.
– Turn the pole clockwise until it clicks into place.
– Put the fixing aid as well as the basket for small parts on the pole, until they are resting flat.
4. Plug the mains plug into a socket. The display shows 0. The device is ready for use.
Before using for the first time, let the sterilisation process run once without any parts to be sterilised.
10
1
3
4
5
6
2
11
12
7
8
9
10