Charging The Internal Battery Of The Portable Power - DieHard Energía Portátil 950 Manual Del Usuario

3. FEATURES
8
7

4. CHARGING THE INTERNAL BATTERY OF THE PORTABLE POWER

IMPORTANT! CHARGE IMMEDIATELY
AFTER PURCHASE, AFTER EACH
USE AND EVERY 30 DAYS, TO KEEP
THE PORTABLE POWER's INTERNAL
BATTERY FULLY CHARGED AND
PROLONG BATTERY LIFE.
CHECKING THE LEVEL OF THE
INTERNAL BATTERY
Press the Battery Status button on the
front of the unit. The LED lights will indicate
the current charge level as follows:
(green) solid –
100%-70% of full charge.
(yellow/orange) solid –
70-30% of full charge.
(yellow/orange) flashing –
Less than 30% of full charge.
CHARGING THE INTERNAL BATTERY
Charge the internal battery for the
Portable Power using an extension cord
(not included).
NOTE: Use of an improper extension cord
could result in a risk of fire and electric shock.
1
2
5
6
9
13
12
1. Jump start ON/OFF switch
2. Built-in light and switch
3
3. LED indicators
4
4. 12V DC power outlets (2)
5. USB port
6. Battery status and USB
ON/OFF button
7. Air compressor gauge
8. Compressor ON/OFF switch
9. Storage compartment
for compessor hose
10. Charging port
11. Clamps and cables
10
12. Adapters for compressor (3)
13. Air compressor hose
11
1. To charge, plug an 18 AWG or larger
extension cord into the charger plug
on the side of the Portable Power.
2. Plug the extension cord into a 120VAC
electrical wall outlet.
3. While the Portable Power is charging,
the (yellow/orange) LED will be lit
until the level reaches 70% of charge,
then the
until it is fully charged. When fully
charged, the
pulse. Complete charging may take up
to 72 hours.
4. When the internal battery is fully
charged, the charger will automatically
go into maintain mode and maintain
the battery at full charge without
damaging it. When in maintain mode,
the (green) LED will pulse, as long
as there is an AC cord connected to
the charging port.
5. Charge the jump starter as soon as
possible after use.
4
• •
(green) LED will be solid
(green) LED will