Project Source DC2430R Instrucciones De Ensamblaje página 10

ASSEMBLY INSTRUCTIONS
13. Insert the first shelf on the bottom of the cabinet
box.
14. Insert the second shelf into the cabinet at an
angle as per the drawing and set it on the higher
set of shelf holders. Press down slightly on the
shelf from the top until the shelf is snuggly in
place and fully supported by the shelf holders.
15. Lift the first shelf from the bottom of the cabinet at
an angle and set it on the lower set of shelf holders.
Press down slightly on the shelf from the top until
the shelf is snuggly in place and fully supported by
the shelf holders.
13
14
15
10