Publicidad
Idiomas disponibles
Idiomas disponibles
ADVANCED FUNCTIONS
16
Restarting the air conditioner
automatically
When the air conditioner is turned on again
after a power failure, this function restores the
previous settings. This function is a factory de-
fault setting.
Disabling auto restart
1
Open the front cover.
- Lift up both sides of the cover slightly.
* The feature can be changed according a
type of model.
2
Press the On/Off button and hold it for 6
seconds.
- The unit will beep twice and the lamp will
blink 6 times.
* The feature can be changed according a
type of model.
- To re-enable the function, press the On/
Off button and hold it for 6 seconds. The
unit will beep twice and the blue lamp will
blink 4 times.
!
NOTE
If you press and hold the On/Off button for
3 – 5 seconds instead of 6 seconds, the
unit will switch to the test operation. In
the test operation, the unit blows out
strong air for cooling for 18 minutes and
then returns to the factory default set-
tings.
Comfort Sleep Mode
Comfort sleep mode is the function to set op-
timal air current, air flow, and timer to help
comfortable sleep. Every time you press
button, it repeats Mode ON/OFF. Com-
fort Sleep Key can be input during cooling,
heating, dehumidification, Air circulation, and
air cleaning operation. When this mode is ON,
it is automatically set to sleep timer of 7hr.
|
1
Press
to turn on the power.
2
Press
.
Cooling
- During cooling, dehumidifying, Air circulation,
and air cleaning operation, the air flow direc-
tion is fixed to the upper most direction and
is set to minimum air flow.
- During heating operation, the air flow is fixed
to the lower most direction and is set to low
air flow
!
NOTE
• In this mode, you can control tempera-
ture and air flow. Sleep timer setting
hours can be changed. During Comfort
sleep operation mode, if the mode is
changed, only sleep timer function is
maintained.
• In the Cooling and Dehumidifying modes,
the temperature increases by 1°C after
30 minutes and by a further 1°C after an-
other 30 minutes for a more comfortable
sleep. The temperature increases with up
to 2°C from the preset temperature.
Heating
Publicidad
