Publicidad
Idiomas disponibles
Idiomas disponibles
How to turn off the self-cleaning feature
You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in
the oven.
1.
Press OFF/CLEAR.
2.
You will be able to open the oven door once the oven has cooled down for
approximately 1 hour.
After a self-cleaning cycle
•
You may notice some white ash in the oven. Wipe it up with a damp cloth
after the oven cools. (If white spots remain, remove them with a soap-filled
steel wool pad and rinse thoroughly with a vinegar and water mixture).
•
If the oven is not clean after one cycle, repeat the cycle.
You cannot set the oven for cooking until the oven is cool enough for the door
•
to unlock.
NE63B8611-03_IB(FULL)_EN+MES+CFR.indb 49
NE63B8611-03_IB(FULL)_EN+MES+CFR.indb 49
Steam-cleaning
How to set the oven for steam-cleaning
For light cleaning, the steam-cleaning function saves time and energy. For heavier-
duty cleaning, use the self-cleaning function.
1.
2.
3.
4.
5.
6.
NOTE
When steam-cleaning, use exactly 10 oz. of water since this produces the best
results.
NOTE
If the oven temperature is above 100˚F, Steam Clean can not be pressed. Because
this function produces the best results when started while the oven is cool, we
recommend that you wait until the oven has cooled down and Hot disappears from
the display.
CAUTION
Wear the glove during cleaning.
Remove all accessories from the oven.
Pour approximately 10 oz. (300 ml) of
water onto the bottom of the empty
oven and then close the oven door.
Use normal water only, not distilled
water.
Press Steam Clean.
Press START/SET.
When the operation is complete, the
display will blink and a beep will sound.
Press OFF.
Clean the oven's interior.
There will be a significant amount of
water remaining on the bottom of the
oven after a steam-cleaning cycle.
Remove the residual water with a
sponge or soft dry cloth.
English 49
2023-10-13 오후 2:14:18
2023-10-13 오후 2:14:18
Publicidad
