Publicidad
Idiomas disponibles
Idiomas disponibles
1
Continuous use
If the tool is operated continuously until the battery
cartridge has discharged, allow the tool to rest for 15
minutes before proceeding with a fresh battery.
Torque Adjustment Operation
CAUTION:
●Choose 3 different gear based on different
workplaces.
The torque adjustment can be adjusted in 3 steps.
According to the requirement of different workplaces,
Press the button on the panel to set the torque
among step L, H and Smart-loosen.
1
Smart-loosen Step: Under this special smart-loosen
step, to loosen the screw, simply set the reversing
switch lever to counterclockwise position.Once the
screw is loosened, the tool will stop immediately,
even if the switch trigger is not released. This gear
can be uesd to loosen but not completely removethe
screw. When set the reversing switch lever to
clockwise position, the function is the same as H
step.
L Step: Press the switch trigger, and the tool runs
continuously at a low speed. The maximum torque is
90 N•m.
H Step: Press the switch trigger, and the tool runs
continuously at a high speed. The maximum torque is
180 N•m.
MAINTENANCE AND
INSPECTION
Cleaning Ventilation Slots
The vents of the machine must be kept clean, it
should be cleaned regularly or at any time when
blockage occurs
Inspecting the Mounting Screws
Always check whether the mounting screw is tight, if
the screw is found loose, it should be tightened again
EN
12
1.Led Light
1.Torque Setting
Panel
immediately to avoid accidents.
Cleaning
Do not use liquid such as water or chemical cleaner
to clean the machine, Just wipe it clean with a dry
cloth.
*To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by authorized service centers, always
using original replacement parts.
For battery tools:
Ambienttemperature range during operation and
storage: 0℃ - 45℃（32 ℉ -113 ℉）.
Recommended ambient temperature range during
charging:5℃ - 40℃（41 ℉ -104 ℉）.
Model
FFCL20-02
Charger
Battery Pack
FFBL2020
FFBL2040
Publicidad
