Project Source F330 Manual De Instrucciones página 5

PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and hardware contents list. If
any part is missing or damaged, do not attempt to assemble the product.
Tools required for assembly (not included): list here tools that are
required but not included.
Example: wrench, phillips screwdriver, hammer, pliers
ASSEMBLY INSTRUCTIONS
1. Cut filler to the desired width / height if needed.
* Please note it is best tape the filler using painters' tape before
cutting to prevent chipping and/or rough edges. If you do not feel
confident in your ability to perform this task, please contact a
licensed professional.
2. Fasten the screw from the inside of the cabinet
box to hold the filler as per the drawing
FILLER PANEL FOR BASE CABINET
1
2
5