Create SILKAIR CONNECT ELITE PRO Manual Del Usuario página 13

• During drainage, the body can be tilted
slightly backwards.
• If the water tank cannot hold all the water,
before it is full, stuff the water outlet with
the water plug as soon as possible to pre-
vent water from flowing to the floor or the
carpet.
• When the water is discharged, stuff the water
plug, and tighten the drainage cover.
Special caution for heating mode:
• When heating mode works, if you don't want
to empty the water tank under this mode,
please connect a water drainage pipe to re-
move the water out continuously:
1. Remove the rubber plug and keep it for fu-
ture use.
2. Connect one end of the drain pipe (14 mm)
into the water outlet and put the other end
into a water container.
Note: The water container must be at or low-
er the outlet level.
CONTINUOUS DRAINAGE (OPTIONAL, ONLY APPLICABLE TO DEHUMIDIFYING MODE)
• Unscrew the drainage cover, and unplug the
water plug.
• Set the drainage pipe into the water outlet.
• Connect the drainage pipe to the bucket.
E NGLI SH
13