Publicidad
Idiomas disponibles
Idiomas disponibles
How to use Grilling maker
Unpack the unit and place it in a flat horizontal countertop and wipe the outer surface and
non-stick plate with wet soft cloth. Then connect the appliance to the rated supply and
preheating. It is recommended to coat a layer of vegetable oil when preheating. This helps
to protect the non-stick surface. Some odor may be smelled during initial preheating; this is
normal and would disappear after one or two use.
1. Before use check the cooking plate is clean and free from dust and food particles. Wipe
with a damp cloth if necessary.
2. Connect the appliance to the rated supply and adjust the temperature. Then the red
lamp will be on. The red lamp is power on indication and will stay on when the appliance
connect to power supply.
3.Usually it will take for approximately 10 minutes, the cooking temperature has reached
the preset temperature. Now you can put grilling and fillings into the cooking plate.
4. Make sure the drip tray is in position and put the prepared grilled the bottom cooking
plate. It is recommended to use oven mitts and pot holder to reduce the risk of hurting from
touching hot surface.
5.The grilling time should be approximately 20 minutes. Exact grill time vary according to
your personnel taste and the fillings. 烤的时间大约为 20 分钟。
6. Once the cooking process has finished remove grilled with a plastic or wooden spatula.
Never use metal utensils as this would do damage to the non-stick coating.
7. Disconnect the power supply and press the button to release the pot after unit cool down.
When the unit completely cool down, to clean the drip box.
8. Note: The appliance with auto-shut off function to ensure safety after continuous 3 hours
operation, it can be used normally only disconnect the power supply and plug it in again.
Only household available
The product chart
Base
drip box
Glass Cover
10
Glass
handle
Cover
Cooking plate
Supply Power
power
Publicidad
