Create TOAST PRO Manual Del Usuario página 7

• Do not let the cord hang over the edge of a table or bench top. Do not let it come in contact
with hot surfaces and do not place the appliance near open fires or any type of heat and
sources of ignition.
• Operate the appliance on a flat, heat-resistant level surface in a tidy and well-lit area to
prevent accidents.
• Never leave the appliance unattended during operation.
• Only use accessories recommended by the manufacturer.
Caution!
Do not toast:
1. Pastries with runny fillings or frosting.
2. Torn slices of bread.
3. Buttered bread or wrapped food
4. Small-sized bread, mini-baguettes, breadsticks, etc.
1. Bread Carriage Lever
2. Browning Control Knob
3. Defrost button
4. Reheat button
5. Cancel button
6. Removable Crumb Tray
1. Remove all packaging materials including those that may be inside the toasting slots or
toasting lever slots.
2. Wipe the exterior with a damp cloth. Dry thoroughly. Do not use alcohol, abrasive cleaners
or scourers.
3. Make sure the crumb tray is pushed all the way into the back and that the lever is in the
uppermost position before plugging in the toaster's power cord.
4. Unwrap the power cord and plug into a 220-240V AC outlet.
5. Turn the browning control knob to the lightest setting.
6. Without inserting any food into the bread slots, push the bread lever all the way down until
it locks. (The lever will not lock if the toaster is not plugged into a power source.) The first
toasting process will preheat the new elements and burn off any dust which may have
accumulated during storage or manufacturing. It is normal for this burn off to create an
odour. Your toaster is now ready for use.
PARTS LIST
1
2
BEFORE THE FIRST USE
3
4
5
E NGLI SH
6
7