Delta MINI MILKQOOL Manual De Instrucciones página 8

USING YOUR COFFEE MACHINE
FIRST USE OR AFTER A LONG PERIOD OF NON-USE
First read the SAFETY INSTRUCTIONS.
Remove the water tank and fill it with water.
1
Remove the water tank and the lid.
Rinse the water tank before using.
Fill the water tank to the MAX level shown with cold
drinking water only.
Reattach the lid and reinsert the water tank correctly.
The water level should never be higher than the MAX level or lower than
the MIN level.
Turn the device on.
2
Plug the lead into the socket.
Turn the device on by pressing any of the buttons
Pre-heating:
A white light will illuminate the Delta Q logo;
The buttons will blink in sequence (green colour) for about 1 minute.
Ready to use:
After reaching the right temperature, buttons A, B and C will turn green.
If the milk tank is inserted into the device:
- If the beverage selector is Cappuccion or Latte, button D and selector's side light are green.
- If the beverage selector is Cleaning, button D and selector's side light are bule.
If the milk tank isn't inserted into the device, button D and selector's side light are off.
Place a cup (min. 250ml) under the nozzle
3
Press the tisane button to rinse the device
4
Repeat this step twice.
If water does not come out, remove the water tank and re-insert it
in its original position.
Repeat this step until there is a continuous flow of water.
— 07 —
.
A B C
C
EN