Optika Italy H Serie Manual De Instrucciones página 7

7.1.2 USB Mode
1. Plug the USB cable provided with the camera into USB Video
• Do not connect the USB cable into the "USB Mouse" port. Connecting the camera to the "USB Mouse" port, it
will not be connected to the PC and it will not display any image on the screen.
2. Plug 12V/1A power cable into DC 12V slot
⑧
• The LED Indicator
3. Press ON/OFF Button
• The LED indicator will turn into blue.
4. Start the ProView software.
5. Clicking the camera name in the Camera List starts the live image.
• When the USB cable is connected, the mouse will not work. If you want to use the mouse, please unplug the
USB cable and restart the camera.
7.1.3 WLAN Mode (AP mode)
The PC should be a WLAN enabled one.
• For Windows user (Windows 7/8/10 [32/64 bit]), use ProView.
• For Mac OS and Linux user (Mac OS 10.10 or above or Linux distributions with kernel 2.6.27 or higher), use LiteView.
1. Plug the HDMI cable into the HDMI port
2. Plug the USB mouse into USB Mouse port
3. Plug 12V/1A power adapter into DC 12V slot
⑧
• The LED Indicator
4. Press ON/OFF Button
• The LED indicator will turn into blue.
5. Move the mouse to the bottom of the UI and click the
video window. A small window called Settings will pop up as shown below.
6. Click Network>WLAN property page and choose the AP option in the WiFi Mode edit box (the factory default configu-
ration is AP mode).
7. Install ProView or LiteView on your PC.
8. Plug the USB WLAN adapter into the USB2.0 port
⑨
will turn into red.
⑦
to turn on the camera.
④
to connect the C-HUB4K camera to HDMI display.
①
⑨
will turn into red.
⑦
to turn on the camera.
Fig. 2 - WLAN configuration Page
③
to connect the C-HUB4K camera to the computer.
to supply power for the camera.
to get control of the camera by using built-in software HDMIPRO.
to supply power for the camera.
button on the Camera Control Toolbar at the bottom of the
②
of the camera.
Page 7