Preparation For Use; Attaching The Rollers - Garant 914520 Manual De Instrucciones

Included in scope of supply
12 ×
2 ×
2 ×
Tool required for fitting fixed wheels and castors*
5 mm hexagon L-wrench
* not included in the scope of supply

6. Preparation for use

CAUTION
Crush hazard during assembly work
Crush hazard for the hands and feet during assembly work and when closing the drawers.
» Wear safety shoes and safety gloves.
» Make sure the workbench is standing securely.
» Before starting work, apply the parking brakes on the castors.
» Assembly of the roller cabinet and mobile workbench requires two persons.

6.1. ATTACHING THE ROLLERS

A
(Fig. )
i
To avoid damaging the visual appearance of the product, use the cardboard packaging as an
underlay.
ü Pull the arrowed transport restraints out upwards and remove them.
1. Only for the roller cabinet: Take off the X-ABS tray.
2. Only for the ToolTruck: Remove the storage shelves from the cupboard section.
3. Take the four rollers from the drawer or side compartment on the roller cabinet or mobile
workbench.
4. Lock the drawer or optional side compartment, remove the key.
5. Turn the roller cabinet or mobile workbench upside down.
6. Using the hexagon L-wrench (5 mm), attach the two castors and two fixed wheels.
» The rectangular hollow section for the fixed wheels is on the inside.
7. Turn the roller cabinet or mobile workbench the right way up, stand it on its rollers.
8. Lock both castors by applying the parking brakes.
9. Only for the roller cabinet: Put the X-ABS tray into position.
10. Only for the ToolTruck: Install the storage shelves in the cupboard section.
Washers
Castors with parking brakes
Fixed wheels
www.hoffmann-group.com
en
19