Publicidad
Idiomas disponibles
Idiomas disponibles
GB
1. Micro USB adapter
2. USB-A adapter
3. USB Type-C
cable
®
4. Case cover
5. 8-pin adapter
6. SIM card needle
Unfold the charger
Unfold the charger by lifting the top part and pulling
the parts apart. The charger can be folded or set
up as desired. The parts of the charger are held
together by the internal magnets.
NOTE: Devices can also be charged when
folded or set up.
Supplying power to the charger
Connect the included USB cable to the charger's
USB Type-C
power port and a USB charger. After
®
switching on, the LED flashes blue 3 times and then
changes to red. The device switches to standby
mode and is ready for charging.
NOTE: To ensure 2 devices can be charged
safely and efficiently with the fast charging
function, you must use a USB fast charger
(QC3.0 and Power Delivery) with at least 20
watts of power.
Charging devices
Smartphone:
Place the smartphone in the center of the smart-
phone charging point area. The charging process
starts. The LED lights up blue during charging and
turns off when the device is fully charged. If the LED
7
3
2
1
5
6
flashes blue, there is a malfunction. Please adjust
the smartphone on the charging surface. Remove
objects that are between the charging surface and
4
the smartphone. Make sure that the smartphone
supports inductive charging.
NOTE: Fold is suitable for charging MagSafe
compatible smartphones (some iPhone models).
If you want to use the magnet function with
a non-MagSafe compatible smartphone, use
appropriate metal rings to stick to smartphones
or their protective cases.
Wireless headphones:
Place the Qi-enabled case of the wireless headpho-
nes in the center of the smartphone charging point.
The charging process will start.
Smartwatch:
Place your Qi-enabled smartwatch in the center of
the Watch charging point. The charging process
will start.
NOTE: There should be no metallic objects
between the charger and the smartwatch.
Safety instructions:
• Never open the device.
• Do not immerse the device in water and protect it
from moisture.
• Place the device only on flat surfaces.
• Never connect the device by force.
• Unplug electronic devices if they are not going to
be used for a long period of time.
• Do not place cards with magnetic strips, magnetic
recording media or metal objects on the charging
surface. Charging does not take place and can
lead to overheating!
• If necessary, remove the case before placing your
smartphone on the charging base.
• Wearers of pacemakers should keep a sufficient
distance between the charger and the pacemaker.
Consult the attending physician in case of doubt.
• This product may impair the function of medical
GB
8
Publicidad
