Descargar Imprimir esta página

HyperIce Hypervolt Go 2 Instrucciones De Uso página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 25
Operating
Press down the power/speed button on the back of the device. Hold for two seconds
until the battery level indicator (LED band) illuminates, then release. Your Hypervolt Go
2 is now ready for use. Choose your desired speed (1-3) by pressing the power/speed
button once per speed. The white lights on the back will indicate speed setting. To power
off, simply hold the power/speed button down for two seconds.
Changing head attachments
Only change attachments after speed setting is turned to off and head attachment
stopped moving. To change head attachments, pull the existing head attachment
straight out to remove and insert the desired head directly into the opening while
pushing firmly.
Charging
Fully charge battery for up to four hours before first use. To charge, connect the
USB-C cord into the charging port on the bottom of the handle and plug the cord
into a USB-A adapter. Then plug the adapter into the wall. The LED light band will
pulsate to show battery level and indicate active charging. The LED light band colors
correspond to the charge level ranging from red (low) to green (fully charged). Full
charge is indicated when the LED band remains green and fully illuminated. Battery
may be recharged at any time and at any battery level. It is not recommended to fully
deplete the battery to the red LED level. The average runtime is 2+ hours depending
on speed level and pressure applied during use. It is recommended to turn the
device OFF while the it is not in use or during storage and travel.
Cleaning and storage
Make sure the power is OFF and the battery charger is not attached. Use a damp,
clean cloth and gently wipe your Hypervolt Go 2. Store in a clean, cool place, out of
direct sunlight, when not in use.
Specifications
1.
Interchangeable head attachments (2)
2. Speed indicators (3)
3. ON / OFF power button
and speed setting button
4. Handle
5. Battery level indicator (LED band)
6. Charging port
5V
2.5A
Operating temperature: +32° F to +113° F [0° C to +40° C]
Storage temperature: -4° F to +158° F [-20° C to +60° C]
Rechargeable lithium ion battery 2500mAh
Frequency: Level 1 - 2000/33 Hz, Level 2 - 2400/40 Hz, Level 3 - 2800/47 Hz
Weight: 1.5 lbs/0.68 kg
Warranty
This product is covered by a limited warranty from Hyperice. Please visit
hyperice.com/warranty to review the warranty in your country
1
4
5
6
2
3

Publicidad

loading