Publicidad
Idiomas disponibles
Idiomas disponibles
step 1
Switch the iron to
standby mode by
pressing the button.
Light will turn RED
problem
things to check
Is the iron plugged in correctly?
Iron does
Is the standby button green?
not heat
Is there enough water in the tank?
Iron
produces
Is iron hot enough?
little to
no steam
Are you pressing the steam buttons?
When the iron is cool, wipe the soleplate with a soft, damp cloth. Or use commercially available soleplate cleaner and
Do not use abrasive cleaners or scouring pads, as this will damage the iron's soleplate and its coating.
fill the water tank and heat the iron to the highest (•••) setting. Once the iron is fully heated, unplug the iron and hold it over a sink.
Press the steam button repeatedly until water begins to drip out of the soleplate. Be careful, as this creates large amounts of steam.
Clean solemate™ by using water & soft dish soap. Let dry before installing it onto iron. Solemate™ is dishwasher safe.
store iron properly
step 2
unplug iron
Iron should remain
unplugged when
not in use.
Troubleshooting
solution
Check to make sure the plug is fully inserted into a working power outlet. Also make sure that
there are no other appliances which could overload the power outlet.
If the standby button is red and you are ready to iron, press the standby button to
change it to green.
Make sure the fabric selector is set to the right fabric setting.
The fabric selector must be set to ( •••) to produce steam. Wait until the lights on the steam
status light turn on to let you know that the soleplate is warm enough to make a good solid
steam burst.
Be sure to press the steam buttons repeatedly to start steam flowing. After that each
push of the steam buttons should produce a burst of steam.
maintenance + cleaning
Always clean the soleplate of a steam iron when it Is cool.
The soleplate should be cleaned if starch or other residue builds up.
follow the instructions according to the manufacturer.
Mineral deposits from tap water can occur in the soleplate vents. To clean,
If you have questions,
1-800-899-5157 or customerservice@oliso.com
step 3
Allow soleplate
to cool thoroughly,
then attach solemate™
(see page 8)
contact our customer service
step 4
wrapping cord
For easy storage, the
power cord can be
wound loosely around
the iron once it has
cooled. Hook allows for
easy hanging storage.
Publicidad
