Publicidad
Instructions for use
Fill
1. Take the kettle out of the base unit.
2. Add cold water up to the 'MAX' mark.
Switched on
1. Once you have filled the reservoir with water, place it on the base plate.
2. Plug the kettle into the mains.
3. Flip the switch to the ON position.
Off
1. When the water has boiled, it will automatically turn off.
2. Do not force the ON/OFF button to turn it off.
3. Unplug from the mains.
Care and Cleaning
Before first use
- Check that the voltage of the device corresponds to that of the electrical network where you are going to
plug it.
- Unplug the appliance from the mains and let it cool down completely.
- Clean the exterior and base unit with a soft, damp cloth, then wipe with a dry cloth. Do not use abrasive
materials.
- To descale the kettle, use special products and follow the instructions on them.
- Please close the lid properly, otherwise the appliance will not turn off automatically and the water may
overflow.
- The kettle is only for heating water, do not use it to heat other liquids.
Environmental Protection
This symbol indicates that this product must be disposed of separately.
The following clauses apply only to users in European countries.
This product must be collected separately at a suitable collection point.
Do not dispose of this product with normal garbage. For more information con-
tact with the seller or the local authorities in charge of waste management。
Waste electrical production should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer
for recycling advice.
Publicidad
