Ameriwood HOME 1795884COM Manual Del Usuario página 25

STEP 19
With the help of another person, carefully turn the unit over on its front side as shown.
Fold the back panel (Q) so it is a "L" shape. Attach the upper back panel (Q) first. Start screws (10)
at both ends but do not tighten. Flush bottom edge of back panel with bottom edge of fixed shelf
(H). Tighten screws. Screw the lip of the back panel (Q) into the under side of the top (F) with
screws (10). Do not nail into fixed shelf (H) yet.
Position side back panels (R) as shown. Flush bottom edge of back panel with bottom edge of
bottom (G). Attach to rear legs with screws (10). Nail (12) straight into back edges of bottom (H),
left and right partitions (C&D) and fixed shelf (H).
Complete fastening upper back panel (Q) by nailing straight into back edge of fixed shelf (H) in the
area between the left and right partitions (C&D).
10
Be sure your unit is square.
Distance from corner to
corner must be equal.
Raw surface of back panels will face up.
ameriwoodhome.com
10
(x20)
#A12120
Q
R
12
(x29)
#A21110
10
25
12
R
10