Paris Rhone PE-MF005 Manual Del Usuario página 16

before frothing milk. MAX Fill Line (500ml / 16.9oz) before heating milk.
·Pour frothed milk promptly to avoid the milk from separating.
·Clean the milk jug immediately after each use. Flush and clean the
walls using warm, soapy water and a non-abrasive cloth. Then dry
with a soft cloth. The milk jug and lid can be washed in the
dishwasher.
Cleaning and Maintenance
Both the milk jug and frothing whisk should be cleaned immediately
after each use to prevent build-up of milk residue.
·Unplug the power cord from the power outlet before cleaning.
·To avoid the risk of electric shock, do not clean the base or the
power cord with water and do not immerse them.
·The milk jug and frothing whisk will be hot immediately after use, so
carefully remove the milk jug from the power base and fill with tap
ENGLISH
24
water. Once the milk jug and frothing whisk have cooled completely,
remove the frothing whisk and rinse off any milk in warm water.
·Wash the milk jug, jug lid, and frothing whisk in warm soapy water,
rinse and dry thoroughly.
·Wipe the exterior of the power base with a soft damp cloth. Dry
thoroughly.
·Store the cleaned milk jug, jug lid, and frothing whisk in safe place
away from children.
Note:
·Do not use alkaline or abrasive cleaning agents, steel wool or
scouring pads on any part of the milk frother as these can
damage the appliance surfaces.
·Never immerse the power base in water or any other liquid.
The outside of the milk jug must always be clean and dry
before placing on the power base prior to use.
·The milk jug and lid can be washed in the dishwasher.
ENGLISH
25