Publicidad
Idiomas disponibles
Idiomas disponibles
Calibration Recommendations
It is strongly recommended that each processor be calibrated at least once every two (2) years. This will help ensure that the
Rionfuser™ Electrofusion Processor is in proper calibration and should enable any potential problems to be identified early.
RF-3000LE
When the calibration period has expired the processor will display the message, "Error 113: Calibration Required," informing
the operator that the calibration date has passed. When this occurs, the processor will stop performing fusions until it
has been recalibrated.
Rionfuser™ LT
When the calibration period has expired the processor will display the message "Error 113: Calibration Required," informing
the operator that the calibration date has passed. This will not prevent the processor from performing fusions; however, the
processor should be calibrated as soon as possible.
NOTICE
The correct output voltage cannot be assured if the
processor is not calibrated at least once every two
(2) years.
Service Contact Information
Calibrating your Rionfuser
1. Send the processor to a WATTS service center and let our technicians do it.
Call (302) 451-1088 to make arrangements for service and to obtain an RMA number for the return.
Every effort will be made to return processors within 2 busines days.
NOTICE
Consult your carrier for the proper method of packaging the
processor for return shipments.Always insure the package
for the full replacement value. Keep in mind that most
carriers will not honor insurance claims if the product is not
shipped in accordance with their guidelines. WATTS is not
responsible for damage caused in shipping.
Electrofusion Processor:
™
2
Publicidad
