FOSSiBOT F800 Manual Del Usuario página 10

Charge & Discharge Simultaneously
● UPS function
This product has a bypass mode, does not need to pass through the battery, can
directly output from the AC.
In UPS mode, when the AC input power of the mains is cut off due to a power outage,
the ac input power of the mains can be used in about automatic switch to product
battery power within 10 ms to ensure AC output.
● UPS Connections
As shown in the figure below, connect the product between the socket on the wall
and the electrical appliances, and the power of the product is in the ON state. When
you turn on the power of the electrical appliances, they will directly use the AC
power of the power grid.
In this state, when the power grid is cut off, it will automatically switch to the
product's internal battery to supply power.
※ In UPS mode of the China, United Kingdom, Europe and South Korea, AC output of the
maximum power below 800W, AC output over 800W, "
overload.
※ The charging and discharging at the same time function of the UPS can work properly only
when the F800 is connected with AC plug.
" AC output icon flashes indicating
6