Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
Please read the operating and installation instructions carefully!
They contain important information on how to install, use and maintain
the appliance.
The manufacturer is not liable if you fail to comply with the instructions and
warnings.
Retain all documents for subsequent use or for the next owner.
•
Do not connect the appliance to the electricity supply until all packing and
transit protectors have been removed. Keep children away from packaging
and its parts. Danger of suffocation from folding cartons and plastic film!
•
Leave to stand for at least 4 hours before switching on the product, to allow
compressor oil to settle if transported horizontally.
•
Make sure there is no transport damage.
•
WARNING: Do not damage the refrigerant circuit.
•
WARNING: Maintain the ventilation openings in the appliance enclosure
or in the built-in structure, free of obstruction.
•
Never use water to wash the compressor position, wipe it with a dry cloth
thoroughly after cleaning to prevent rust.
•
Handle the appliance always with at least two persons because it is heavy.
•
Install and level the appliance in an area suitable for its size and use.
•
Make sure that the electrical information on the rating plate agrees with the
power supply. If it does not, contact an electrician.
•
The appliance is operated by a 220-240 VAC/50 Hz power supply. Abnormal
voltage fluctuation may cause the appliance to fail to start, or damage to the
temperature control or compressor, or there may be an abnormal noise when
operating. In such case, an automatic regulator shall be mounted.
•
Only for UK: The appliance's power cable is fitted with 3-cord (grounding)
plug that fits a standard 3-cord (grounded) socket. Never cut off or dismount
the third pin (grounding). After the appliance is installed, the plug should
be accessible.
EN 2
Publicidad
