Publicidad
Idiomas disponibles
Idiomas disponibles
1. Read the user manual carefully and keep it for future reference.
2. Place the heater on a firm, level, open surface free from obstructions and at least 3
feet (0.9m) away from any wall or any combustible material.
3. Make sure the Mode Setting Knob pointing to the "OFF" position before plugging
the heater into the outlet.
OFF
4. Plug into a polarized
BE SURE THAT THE PLUG FITS TIGHTLY INTO OUTLET.
When the plug fits loosely into receptacles, it may slip partially or completely out of the
receptacle with only the slight movement of the attached cord. Receptacles in this
condition may overheat and poses a serious fire hazard; if covered by a curtain or drape,
the fire hazard is even greater.
5. Turn the Manual Temperature Control Knob fully clockwise to the "+" position(highest
setting) for assuring the modes settings activated.
OPERATIONS
AC
120V~ outlet.
5
OFF
+
Publicidad
